Got my cam installed :D
10-10-2004, 09:15 PM
#1
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: sioux falls sd
Posts: 626
Likes: 0
Received 0 Likes
on
0 Posts
Got my cam installed :D :dance:
install went pretty good alot of hours, feels good if ya can do it by yourself
right click save as
http://sio.midco.net/dvandentop6/dva...p230238cam.mpg
PICS!
http://sio.midco.net/dvandentop6/z06caminstall/
tired as hell i quit working at like 2:30 last night, started at 11:30am
also ran into snag this morning with broken cheader on passenger side :x
got some of the really hard jb weld stuff, will see if that holds :x
and check out the odd *** spark plug that was in there :hmm:
pic of paul is actually him looking for a bird with shotgun not him holding his thingy :rotfl:
also cam is
230/238 with X-ER lobes .591/.605 lift on 114 LSA - the grind is a Comp #3729 "High Energy
install went pretty good alot of hours, feels good if ya can do it by yourself
right click save as
http://sio.midco.net/dvandentop6/dva...p230238cam.mpg
PICS!
http://sio.midco.net/dvandentop6/z06caminstall/
tired as hell i quit working at like 2:30 last night, started at 11:30am
also ran into snag this morning with broken cheader on passenger side :x
got some of the really hard jb weld stuff, will see if that holds :x
and check out the odd *** spark plug that was in there :hmm:
pic of paul is actually him looking for a bird with shotgun not him holding his thingy :rotfl:
also cam is
230/238 with X-ER lobes .591/.605 lift on 114 LSA - the grind is a Comp #3729 "High Energy
it's my impending future 
10-11-2004, 10:17 AM
#6
TECH Fanatic
Join Date: Jan 2003
Location: Northern Va
Posts: 1,094
Likes: 0
Received 0 Likes
on
0 Posts
...and check out the odd *** spark plug that was in there...
... pic of paul is actually him looking for a bird with shotgun not him holding his thingy...
Congrats on the cam install
, my install is coming up soon. What did you use to hold up the lifters? 
Trending Topics
10-11-2004, 07:34 PM
#8
TECH Enthusiast
Thread Starter
iTrader: (1)
Join Date: Nov 2001
Location: sioux falls sd
Posts: 626
Likes: 0
Received 0 Likes
on
0 Posts
took me alot of hours but it well worth doing it on your own, rather then paying someone else $700 to do something i am capable of doing
got 114 since i got a damn good deal on this cam
got 114 since i got a damn good deal on this cam
