No oil pressure!!! Please help!!!
Originally Posted by 68bird
like someone said earlier, your sending unit could be bad! i dont know if there is a way to check to see if it works or not, but i would think that is what it is!
Banned
Joined: Sep 2002
Posts: 1,298
Likes: 0
From: So Cal, CA
I never really see much oil pumped up top at idle...there should be some after running that long though.
I would of guessed front oil galley plug. Was the rear engine cover (what the rear main seal rides) removed? There is a rear plug in the back cover that slips in with an o-ring as well.
I would of guessed front oil galley plug. Was the rear engine cover (what the rear main seal rides) removed? There is a rear plug in the back cover that slips in with an o-ring as well.
Originally Posted by C4VetteLS1
I never really see much oil pumped up top at idle...there should be some after running that long though.
I would of guessed front oil galley plug. Was the rear engine cover (what the rear main seal rides) removed? There is a rear plug in the back cover that slips in with an o-ring as well.
I would of guessed front oil galley plug. Was the rear engine cover (what the rear main seal rides) removed? There is a rear plug in the back cover that slips in with an o-ring as well.
Ok I have the rear cover off the block. There are two holes on the top of the block and one on the left side toward the bottom. Where is the plug supposed to look like? Anyone got any pics of the rear of a block with no cover? HELP ASAP!!!!
