I know this question has been asked alot, but the answer guys were looking for was NA, and I want one for n2o. I have tci 3800 stall, 3.73 gear, 28in et drags, stock 2000 heads, and 150 shot. was wondering which cam would be better for the spray, or is there any other cams out there, that would work good with my setup. thanks

 

the 231/237 I would think would be better for the spray

 

I'll try to russle up a few on-the-juice dyno comparisons of the cams in question. the 231/237 came out a little a head on the dyno and at the track.

*goes hunting*

 

you'll like the 231/237 better for nitrous because of the split, also I think you'd like hte 233/233 112 torquer cam better than the 231/231 at least thats what i've heard.

 

Yes. The torquer should be up in all areas over the 231/231 b/c of its aggressive lobes and longer duration.

 

out of those two, the 231/237 is better for nitrous.

 

will the 231/237 be ok with stock heads, or is there a better cam only n2o cam?

 

Mine works fine on stock heads... it would benefit from some ported heads though to help it breathe in the upper rpms, but with stock it still runs great.