Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Just what everyone wants to see!! Another cam?

Thread Tools
 
Search this Thread
 
Old 11-18-2004 | 05:14 PM
  #21  
cyphur's Avatar
TECH Senior Member
iTrader: (10)
 
Joined: Mar 2003
Posts: 8,009
Likes: 0
From: North Texas
Default

If you're lookin for a big cam that doesn't need to be spun to ungodly RPM's, and still has a real nasty lope, then look at Futral's Ron Jeremy cam. I'm suprised nobody has suggested it yet. distortion69 and SidewaysOZ on this board both run that cam. specs are 236/239 601/611 111. its a wicked cam. offers some serious power gains. if you don't want to go that big, look at the f14, which is 232/234 598/598 112 or 114. still a very nice cam, just a little smaller. hit allan or candy up and talk to them for a lil while, and tell them what you want. they'll have somethin for you.
Old 11-18-2004 | 05:54 PM
  #22  
luv_my_z28's Avatar
11 Second Club
iTrader: (1)
 
Joined: Jun 2004
Posts: 76
Likes: 0
From: valdosta, ga
Default

I've got the TR224 in mine with a 112 LSA, Its a nice cam for a daily driver. I had to have tuning done on mine, because its an auto. I've drove a M6 with the exact same cam and it drove pretty good with no tuning. I dont have anything to compare it to because this is the only cam i've had besides stock, but if you just wanna wake up the motor it'll get the job done.
Old 11-18-2004 | 08:21 PM
  #23  
Tranzaman00's Avatar
Thread Starter
TECH Resident

 
Joined: Jul 2004
Posts: 813
Likes: 0
From: It's hard work to look this good
Default

What would be a step up from the 224? I need to get a tune anyway cause I am throwing flames out of the tail pipes.
Old 11-19-2004 | 03:29 AM
  #24  
Black02SS's Avatar
TECH Junkie
iTrader: (36)
 
Joined: Oct 2002
Posts: 3,291
Likes: 1
From: Kokomo, IN
Default

I am running a 228/230 FM11 and it is wonderful. This replaced my old 224 I had. I have no drivability issues or anything, but have tuned the car.



Quick Reply: Just what everyone wants to see!! Another cam?



All times are GMT -5. The time now is 06:14 AM.