5.3 Flow Numbers Are In.
Thread Starter
On The Tree
Joined: Oct 2004
Posts: 185
Likes: 0
From: Brady TX
5.3 Flow Numbers Are In. Ok after waiting a month my heads are on there way. They are the 5.3 s2. The heads flowed 298 cfm on the intake and 237cfm on the exhaust @ 600 lift. Would the F-11 be a good match for this? Thanks
Teching In
Joined: Oct 2003
Posts: 5
Likes: 0
Originally Posted by 99ss00ws6
Ok after waiting a month my heads are on there way. They are the 5.3 s2. The heads flowed 298 cfm on the intake and 237cfm on the exhaust @ 600 lift. Would the F-11 be a good match for this? Thanks
you ready to win some $$$????????
Originally Posted by jrp
i think you mean realistic.
My thoughts exactly.Most REAL world Stage 2 LS1 flow numbers are 290-305 with 5.3 heads..and thats plenty for the average build up.The exhaust numbers are great if thats without a pipe! Trending Topics
Originally Posted by 99ss00ws6
I got these from FFHP
i have FFHP stg 1 5.7's. Were yours cnc'd by TEA or PP? mine were done by TEA.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
On The Tree
Joined: Oct 2004
Posts: 185
Likes: 0
From: Brady TX
Originally Posted by jrp
post the full flow sheet and i'd have them independently flowed as well.
i have FFHP stg 1 5.7's. Were yours cnc'd by TEA or PP? mine were done by TEA.
i have FFHP stg 1 5.7's. Were yours cnc'd by TEA or PP? mine were done by TEA.
