Is it possible to make 450rwhp in a automatic?
#21
TECH Enthusiast
Thread Starter
Join Date: Dec 2003
Location: Amarillo Texas
Posts: 647
Likes: 0
Received 0 Likes
on
0 Posts
I know im going to have to step up fuel injectors after reading some posts but do you think i can still make it to the 11s with a 3000 stall if not i guess its for sale.
#23
10 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Cali/Bay Area
Posts: 3,412
Likes: 0
Received 0 Likes
on
0 Posts
Well then damn, there is something wrong with my car, I should be a mid 10 sec car as I have a 3580 race weight and most every mod known. Now with N20 sure I can. What's wrong with my setup not to get these 10's N/A that are so easy??
Dan
Dan
#25
TECH Fanatic
Join Date: Mar 2003
Location: La Porte, TX
Posts: 1,839
Likes: 0
Received 0 Likes
on
0 Posts
I did it with a locked convertor....
https://ls1tech.com/forums/attachmen...chmentid=14806
LS6 intake, PP stage II heads, G5X-3, PYE3600 stall, 3.73 gears 10 bolt, Pacesetter headers, offroad y, cutout. 17" mt streets @ 25 psi. no airfilter (I don't run with one at the track so I didn't run with it on the dyno) MTI lid, ported TB, TR6 plugs and a safe Nitrous tune from MTI. Yes it can be done.
1st run was unlocked 2nd run was locked...pretty damn effecient convertor.
https://ls1tech.com/forums/attachmen...chmentid=14806
LS6 intake, PP stage II heads, G5X-3, PYE3600 stall, 3.73 gears 10 bolt, Pacesetter headers, offroad y, cutout. 17" mt streets @ 25 psi. no airfilter (I don't run with one at the track so I didn't run with it on the dyno) MTI lid, ported TB, TR6 plugs and a safe Nitrous tune from MTI. Yes it can be done.
1st run was unlocked 2nd run was locked...pretty damn effecient convertor.
#26
10 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Cali/Bay Area
Posts: 3,412
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by WS6snake-eater
I did it with a locked convertor....
https://ls1tech.com/forums/attachmen...chmentid=14806
LS6 intake, PP stage II heads, G5X-3, PYE3600 stall, 3.73 gears 10 bolt, Pacesetter headers, offroad y, cutout. 17" mt streets @ 25 psi. no airfilter (I don't run with one at the track so I didn't run with it on the dyno) MTI lid, ported TB, TR6 plugs and a safe Nitrous tune from MTI. Yes it can be done.
1st run was unlocked 2nd run was locked...pretty damn effecient convertor.
https://ls1tech.com/forums/attachmen...chmentid=14806
LS6 intake, PP stage II heads, G5X-3, PYE3600 stall, 3.73 gears 10 bolt, Pacesetter headers, offroad y, cutout. 17" mt streets @ 25 psi. no airfilter (I don't run with one at the track so I didn't run with it on the dyno) MTI lid, ported TB, TR6 plugs and a safe Nitrous tune from MTI. Yes it can be done.
1st run was unlocked 2nd run was locked...pretty damn effecient convertor.
Did you have smoothing turned on? That gragh is very spiky, valve float?