JoSeY

</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by LittleBoyBlu99:
<strong> Hey fellow get that A**kicker to the track and give us the low down and dirty of this cam. Might be the cam I need to break the 10sec barrier. <img border="0" alt="[driving]" title="" src="graemlins/gr_driving3.gif" /> <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" /> </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Doubt I'll be out tonight w/the chance of rain and shitty air conditions...but will be there Friday night for sure...I'lll let you know how it goes down, but I can tell ya...from what I've heard it definatly is the cam to go w/now...idles damn near like stock but with a definate (You don't want none of this) tone... <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

BTL FED

iTrader: (9)

http://www.ls1.com/forums/showthread...ferrerid=11881

Pretty good deal on an X1

98sspullin'em

iTrader: (-1)

will this cam be okay if i dont have heads for a while?

redaddiction

iTrader: (12)

i just got this cam off of here but what pushrod length would i need for stock heads?

marc

JoSeY

Cam will be fine using stock heads but you won't get the full effect...use 7.400 lenth PR's and you'll be fine. I run 7.4's on my stage 2 heads and they're milled .03...no problems.

Any other questions or if you are in the Houston area and would like to see how it idles and performs just shoot me an email.