DramaFoYoMama

6.0 heads on an ls1 block (not stock but what's that matter?) - As fas as I have been told by the guy that ported the heads I think they were just milled .008 to resurface them. They will be used with 1.7 rockers.

DramaFoYoMama

Also, what's the GM part number ffor the LS2 timing chain?

Brains

iTrader: (7)

What, you're not still running the stock pushrods I gave you? 7.400's it sounds like, if the heads truly aren't milled. Depends on the cam though

DramaFoYoMama

What's goin on man? I didn't know you posted over here. I was going to send you a message pretty soon. I was wondering if you would still be willing to do my T-56 buildup and clutch reinstall for me. I had asked you way back in the day. My hydraulics are fubar. I guess I won't be listening to people say stock hydros are ok, 2002 or not. I also wanted to fondle that GTO. Oh and it is a tiny cam until I get another daily driver. Then I'm going to get a monster. The sheriffs in the neighborhood keep riding my *****. Until I can put it on a trailer, it's got to stay somewhat tame. I'll be more than happy to let you take a looksee under the hood when I get it done (hopefully by the end of January) Afterall, what's $5000 worth of parts sitting around gonna do me? lol

Viper

iTrader: (6)

This will tell you exactly:

http://www.holley.com/HiOctn/TechSer...ECVTTech1.html

DramaFoYoMama

I don't have solid lifters (yet - won't be for probably a year or so) nor adjustable pushrods. Anyone got the part number for the chain?

Viper

iTrader: (6)

You just use a kit; it comes with those parts for testing. I believe you can rent the kit.

Ed Curtis

Speaking of which....

Did you get all the pieces???

Ed

Viper

iTrader: (6)

Tomorrow I hope!

Brains

iTrader: (7)

Yeah, I guess you could say I post over here.. Notice my name lights up in red?

DramaFoYoMama

Well, I noticed you were an admin from the getgo. I just thought you started Htown Racing and that was it. I didn't know your scope ranged wider.