does anybody know the horsepower specs on the GM ls1 hot cam and what would you do you think the rear wheel horpower will be my mods a below in my signature.

 

219/229 525 lift on 112 LSA

 

Get headers before cam.

 

 

Well I put the hotcam in a friends car but his is an 01 with ls6 intake, pacesetter longtubes and tuned . His mad 386hp at rear wheels and 371tq. You will need headers but without headers I would guess without headers 350ish.

 

and if you have an auto i would get a convertor before even looking at anything else!

 

Absolutely ^

 

I made 381/373 untuned and with all of the bolt-ons. I have no idea what it makes tuned.

 

Those are some pretty good numbers you guys are getting with just a hotcam and headers. It seems its almost as good as the tr 224 cams and much easier on the springs. Am i right here? The hotcam sounds pretty damn nice as far as exhaust with the lope of that cam. One question though for you guys who do have it, since my car is still under the factory warranty, this doesn't void the warranty on the motor right? As I know its not suppose to?

 

385 rwhp and 379 rwtq through a Moser 12 bolt with 4.11's, tuned with a MAF translator. As for the warranty question that depends on your dealer, mine is fine with it and even did my install for me.

 

Friend of mine made within 3 hp and 5 TQ of the numbers listed above with hooker long tubes and LS6 intake Hot Cam is defently consistent...

 

Just finished my install the other day no #'s till the 2ft of snow goes away will post them once i get em
BTLFEDSS

 

see my sig.