New Dyno numbers with F1 cam
01-10-2003, 12:21 AM
#1
On The Tree
Thread Starter
Join Date: Jan 2002
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
New Dyno numbers with F1 cam the graph is before and after the cam install. the mods are on a 01 Z28
Mods are:
SLP lid
Vig 3600
CC Hooker LT's
Hooker ORY w/ cutout (open)
stock 3.23's on stock RSA rubber.
Both pulls were done with the converter unlocked.
no tuneing on the A/F but upped the timing 4 deg.
and this is with stock heads.
nice gains if you ask me. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
SOM LS1 F1 dyno
peace
-Watson
Mods are:
SLP lid
Vig 3600
CC Hooker LT's
Hooker ORY w/ cutout (open)
stock 3.23's on stock RSA rubber.
Both pulls were done with the converter unlocked.
no tuneing on the A/F but upped the timing 4 deg.
and this is with stock heads.
nice gains if you ask me. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
SOM LS1 F1 dyno
peace
-Watson
01-10-2003, 12:31 AM
#2
On The Tree
Join Date: Mar 2002
Location: Plano, TX USA
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Dyno numbers with F1 cam Great #s - but did you really spin that push rod motor out to 7400 RPMs??? Man you are brave.. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
01-10-2003, 12:31 AM
#3
TECH Resident
iTrader: (56)
Join Date: Jan 2002
Location: Bartlett, IL
Posts: 975
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Dyno numbers with F1 cam Nice #'s <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
But your pre-cam #'s seem kinda low, for an 01' with headers and lid you should be around 330.
But your pre-cam #'s seem kinda low, for an 01' with headers and lid you should be around 330.
01-10-2003, 12:48 AM
#4
On The Tree
Thread Starter
Join Date: Jan 2002
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Re: New Dyno numbers with F1 cam yea but that was with the convertor unlocked. it isnt very effencient. it works goot on the 60 foot tho.
I didnt quite spin it that high. the dyno reads kinda funny after 7K. I took it to the limiter at 7K but on ly on the dyno. it shifts at 6400, but i just wanted to see if the power fell off.
I didnt quite spin it that high. the dyno reads kinda funny after 7K. I took it to the limiter at 7K but on ly on the dyno. it shifts at 6400, but i just wanted to see if the power fell off.
