Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

why does gm put a larger maf on?

Old Feb 2, 2005 | 02:10 PM
  #1  
ssvincels1's Avatar
Thread Starter
On The Tree
 
Joined: Feb 2004
Posts: 123
Likes: 0
Default why does gm put a larger maf on?

if the smaller size mafs can support enough air for 500 hp why would they put money into making a larger size?
Reply
Old Feb 2, 2005 | 02:16 PM
  #2  
777's Avatar
777
TECH Senior Member
iTrader: (21)
 
Joined: Jun 2004
Posts: 6,697
Likes: 2
From: Jacksonville, FL
Default

effeciency...a 2" true dual setup can support 800hp...but a 3" would make it a lot easier to get there (obviously not a direct relationship but i'm sure ya know what i mean)
Reply
Old Feb 2, 2005 | 03:47 PM
  #3  
Patrick G's Avatar
LS1 Tech Administrator
20 Year Member
Photogenic
iTrader: (14)
 
Joined: Nov 2001
Posts: 8,246
Likes: 34
From: Victoria, TX
Default

It was cheaper. They combined the IAT and MAF into a molded plastic assembly. Saved on cost. The larger size made it possible to use the MAF on all of GMs engines, large and small.
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.

Reply
Old Feb 2, 2005 | 06:18 PM
  #4  
MNR-0's Avatar
TECH Enthusiast
 
Joined: Mar 2004
Posts: 647
Likes: 0
From: Australia
Default

Now if only I could locate a Vortech 6000 inlet manifold to mate up with that MAF. Torque city...
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 08:10 AM.