Offset key??
04-24-2003 | 10:22 PM
#1
Thread Starter
TECH Enthusiast
Joined: Dec 2002
Posts: 698
Likes: 0
From: Fort Worth
Offset key?? Does anyone make a offset key for the LS1 crankshaft? I would like to advance the camshaft on my new motor. I will be using the GM heavy duty chain with the stock gears.
04-24-2003 | 10:27 PM
#2
Re: Offset key?? Not that I have seen. However there are some very good alternatives out there.
The best is the roll master double roller set that is keyed for 2-8 degrees of advance or retard.
The other option is Cloyes/CompCams timing chain the has an offset dowel locating device.
I went with the Rollmaster from SDPC. At the time I got it, it was $86!
Ryan Karasek
The best is the roll master double roller set that is keyed for 2-8 degrees of advance or retard.
The other option is Cloyes/CompCams timing chain the has an offset dowel locating device.
I went with the Rollmaster from SDPC. At the time I got it, it was $86!
Ryan Karasek
