Cartek 3X H&C

Reply Subscribe

Thread Tools

Search this Thread

Feb 28, 2005 | 03:29 PM

sickss228

Thread Starter

10 Second Club

iTrader: (27)

Joined: Nov 2004

Posts: 647

Likes: 0

From: Central NJ

Cartek 3X H&C

Anyone running this package or know anyone that does? I want to upgrade but want to hear from some guys on here that have the heads and cam or just the cam. Is it streetable, what kind of power is it making what are your times in the quarter? Thanks

Feb 28, 2005 | 03:44 PM

LS1LT1

10 Second Club

iTrader: (16)

Joined: Nov 2001

Posts: 9,331

Likes: 0

There are a few people on the board that run the 3X package, Pete(BSPZ28), Alex(WS6TransAm01) are two i can think of off the top of my head. Petes car was featured in GMHP magazine back in July of 04 and has run a best of 10.69 at 3200 lbs. Also if you want you can check out the corvette forum there is a bunch of guys over there too.

Feb 28, 2005 | 03:58 PM

gaga

Launching!

Joined: Dec 2003

Posts: 218

Likes: 0

From: White Plains,NY

i rode in pete's car.... its a monster.... made me realize how pathetic my bolt on SS really is!

Feb 28, 2005 | 10:16 PM

John B

Moderator

iTrader: (10)

Joined: Nov 2001

Posts: 3,264

Likes: 21

From: Phoenix, AZ

I have the 3X cam.....very streetable. It does lose a little torque down low but more than makes up for this in the upper RPM bands. I certainly have no issues incinerating my 315/35x17's at 45 MPH in 2nd by just stabbing the throttle :>)

Mar 1, 2005 | 05:29 AM

Slowhawk

LS1Tech Sponsor

iTrader: (12)

Joined: Nov 2001

Posts: 14,865

Likes: 6

From: Bridgewater,Ma

A good friend of mine runs it.Car goes 10.8 at 122mph in an A4 at 3650lbs.Car dyno's 440rwhp.The package does givee up alot of midrange torque though.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last