Hesitation after new plug install
#1
Staging Lane
Thread Starter
Join Date: Nov 2004
Location: Medford OR
Posts: 50
Likes: 0
Received 0 Likes
on
0 Posts
Hesitation after new plug install
A real new newbie here. Nice board. I just changed plugs in my 98 with new ngk tr55s and now there is about a one second hesitation when I step on it. I had gapped them at .06 then pulled them out and regapped to .05, and there is still a hesitation. Is .05 the right gap? any thoughts? Thanks
#2
TECH Apprentice
Join Date: Sep 2002
Location: west coast
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=twocam99]A real new newbie here. Nice board. I just changed plugs in my 98 with new ngk tr55s and now there is about a one second hesitation when I step on it.
Just gap them to what is recommended. The plug gap will not cause the hesitation. I suspect you may have a vacume line or something off. You may have bumped something off while your were working or you forgot to put something back that you took off. I use the AC Delco Iridium plugs. You can't gap them. Just put em in and forget about them. Good luck
Just gap them to what is recommended. The plug gap will not cause the hesitation. I suspect you may have a vacume line or something off. You may have bumped something off while your were working or you forgot to put something back that you took off. I use the AC Delco Iridium plugs. You can't gap them. Just put em in and forget about them. Good luck