How much time required to do a H/C change?
Thread Starter
11 Second Club
iTrader: (1)
Joined: Jan 2002
Posts: 1,161
Likes: 1
From: Indianapolis Area
How much time required to do a H/C change? I want to know it take to do a H/C change for the first time. I have 7 days to do the H/C swap, full exhaust, QA1 drag shocks, rollbar and tuning. Any opinions/
TECH Enthusiast
Joined: Mar 2004
Posts: 697
Likes: 0
It took me 4 days to do a head and cam swap the first time... that was with several trips riding my bike back and forth to the parts store because I kept forgetting things 
, and no garage, so I was limited by daylight every day. 7 days should be PLENTY of time to do what you listed as long as you are prepared and have a decent area to do the work in.
, and no garage, so I was limited by daylight every day. 7 days should be PLENTY of time to do what you listed as long as you are prepared and have a decent area to do the work in. heads and cam can be done in one full day (it'll be a long one though!) providing you have all the parts ready to go.
Shocks should take 1-2 hours
You can factor in exhaust time while doing the H/C since you'll already have the heads off, about an hour or so
So let's say you add in dick around time, that should leave you finished in two days! 5 more days to do tuning and chassis work!
Shocks should take 1-2 hours
You can factor in exhaust time while doing the H/C since you'll already have the heads off, about an hour or so
So let's say you add in dick around time, that should leave you finished in two days! 5 more days to do tuning and chassis work!
Launching!
Joined: Oct 2003
Posts: 249
Likes: 0
From: Cary, NC/University Heights, OH
I'd recommend someone there to help you and it should go plenty fast. Otherwise things get to be a pain in the *** and a lot more snags come up. It helps to have someone else to overcome those snags, help out, and look at things different ways.
Thread Starter
11 Second Club
iTrader: (1)
Joined: Jan 2002
Posts: 1,161
Likes: 1
From: Indianapolis Area
I have pulled the heads off before after I trashed the lifter in a bad mis-shift. That took me 2-1/2 day because I had to disassemble them to replace the valvetrain. Is there a way to pull the cam out without bleeding and removing the A/C condensor? Maybe unbolt the tranny support beam and tilt the motor?
Trending Topics
@ my work i have a snap-on shopkey program that gives estimates, and sincei have to replace a lifter in my car i have just looked at it, 11.5 hrs of book time 
definitely figure on some more if you havent been in there before. The beginning of next month i have to replace a lifter in my 98 z28 and im gonna swap the cam, if anyones in the area that for whatever reason cant get enough of ls1 work i could surely use a hand and some expertise... i've got a garage available to me with any tool you'd ever need and a lift..
definitely figure on some more if you havent been in there before. The beginning of next month i have to replace a lifter in my 98 z28 and im gonna swap the cam, if anyones in the area that for whatever reason cant get enough of ls1 work i could surely use a hand and some expertise... i've got a garage available to me with any tool you'd ever need and a lift.. LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Originally Posted by Gold Phoenix
I have pulled the heads off before after I trashed the lifter in a bad mis-shift. That took me 2-1/2 day because I had to disassemble them to replace the valvetrain. Is there a way to pull the cam out without bleeding and removing the A/C condensor? Maybe unbolt the tranny support beam and tilt the motor?
How to Cam swap
TECH Fanatic
Joined: Sep 2003
Posts: 1,570
Likes: 1
From: San Diego, CA
tokk me 18hrs over 3 days by myself.... i did it in a shop and had a little help looking over my shoulder, if i did it again i could probly do it in about 12hrs....
you learn ALOt your first time!
you learn ALOt your first time!
Originally Posted by Gold Phoenix
Is there a way to pull the cam out without bleeding and removing the A/C condensor? Maybe unbolt the tranny support beam and tilt the motor?
It took me 2 1/2 days. Next time will be faster.
Bill
