is this street-able
Thread Starter
Staging Lane
Joined: Nov 2003
Posts: 82
Likes: 0
is this street-able i am about to put a cam in my car. right now i have longtubes, off-road y-pipe, ported tb, ported maf. the cam is a 231/237 .598 lsa112, with duel springs and i am going to through on a pulley. will this set up work with stock heads? will it be street-able? like for a daily driver? will i get a nice sound out the back? and will it work with stock heads? what kind of power gain would i be looking at?
anyone that can help please post.
thanks
anyone that can help please post.
thanks
12 Second Club
iTrader: (11)
Joined: Jan 2005
Posts: 1,191
Likes: 0
From: NC, Charlotte / SC, RockHill
Will sure u gona gain some good power especially with your old setup , its a good combo as a start . anyways it will work fairly with your heads , probably u will be gaining 390to415 hp.
streetable , mmmmm !! u must ask some people who`v got this cam , although u would need dynos and track results to compare it with your results as a result to prove your pcm tune ..... etc.
streetable , mmmmm !! u must ask some people who`v got this cam , although u would need dynos and track results to compare it with your results as a result to prove your pcm tune ..... etc.
From your sig I'm guessing your M6.
Mine has been a daily driver for a year and a half now.
You need a good tune to get everything out of the set-up.
FYI: I get 15 mpg city and 32 mpg highway.
I picked up 34 rwhp going from my TR 224 to this cam. Also understand that tuning is a HUGE factor in any aftermarket set-up.
Have fun!
Mine has been a daily driver for a year and a half now.
You need a good tune to get everything out of the set-up.
FYI: I get 15 mpg city and 32 mpg highway.
I picked up 34 rwhp going from my TR 224 to this cam. Also understand that tuning is a HUGE factor in any aftermarket set-up.
Have fun!
you're probably gonna want a set of 4.10s for your setup as the lobes aren't very aggressive with that cam and lack a little tq down low. it will still make good power though. also you didnt list a lid. i would invest in that and get a good tune and you'll be good to go.
nate
nate
Trending Topics
very streetable. I drove this around for over a year without any gear changes. Just the stock 3.42's. it was fun for awhile, but gears really brought this cam to life. A night and day difference.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo People don't get a good tune on their set-ups. This is why everyone complains about "low-end torque" in a lot of big cam posts.
I have NO problem passing at 2K rpm's in any gear with my stock 3.42's whatsoever
I have NO problem passing at 2K rpm's in any gear with my stock 3.42's whatsoever