Tony@AFR: G5x3 & AFR 205 *LONG*
03-30-2005 | 01:50 PM
#41
The plan was to run the cam and heads without milling/flycutting. We get conflicting information if that's even possible now that we have the parts. Hence all this nonsense.
03-30-2005 | 06:49 PM
#42
I have to say LGM has been great. Louis is coming to St. louis to flycut the pistons. (now that is service). Additionally Matt at their office has been extremely helpful.
Thanks! Cya at the track!
Thanks! Cya at the track!
