Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Fuel issues

Thread Tools
 
Search this Thread
 
Old Mar 30, 2005 | 05:46 PM
  #1  
Blue Falcon's Avatar
Thread Starter
On The Tree
 
Joined: Feb 2005
Posts: 100
Likes: 0
From: Arnold, MO
Default Fuel issues

My car is misfiring and actually threw a P0366 (crankshaft position sensor) code because it misfired so much. The car would actually die and I couldn't start it for approx. 10 mins. It generally happens between 2-2500 RPM's. It normally happens at low to mid throttle. When the car is misfiring the 02 millivolts were around 90. It seems like the car just isn't getting enough fuel at that point. I did just change injectors with the Heads/cam install. I adjusted my IFR by the correct amount. Also this problem has just started a couple of days ago, and I have had all of this done for a month or so
Reply
Old Mar 31, 2005 | 04:42 PM
  #2  
Blue Falcon's Avatar
Thread Starter
On The Tree
 
Joined: Feb 2005
Posts: 100
Likes: 0
From: Arnold, MO
Default

anybody???
Reply
Old Mar 31, 2005 | 05:22 PM
  #3  
Tech's Avatar
TECH Fanatic
iTrader: (1)
 
Joined: Feb 2004
Posts: 1,042
Likes: 0
From: St. Louis, MO
Default

Put some stock injectors on it and see if your problem goes away.
Reply
Old Apr 1, 2005 | 10:41 PM
  #4  
Cerwin Vega Fan's Avatar
Launching!
 
Joined: Oct 2003
Posts: 248
Likes: 0
Default

Does the car always sseme to be starving for fuel? Maybe a clogged filter or a weak pump could be your problem.
Reply
Old Apr 22, 2005 | 05:30 PM
  #5  
Blue Falcon's Avatar
Thread Starter
On The Tree
 
Joined: Feb 2005
Posts: 100
Likes: 0
From: Arnold, MO
Default

stock injectors are back in, and its still starving. Car is acting alot better now that I have used a Tech II to do a Crankposition Relearn, but it is still stalling out. The car does at least idle now, unlike before
Reply




All times are GMT -5. The time now is 09:15 AM.