Tuned, missed goal, but respectable
#1
TECH Apprentice
Thread Starter
iTrader: (15)
Join Date: Nov 2003
Location: Junction City, Kansas
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
Tuned, missed goal, but respectable
I finally tuned my car yesterday. The end result was 361.8 rwhp and 362.9 torque. The dyno graph looks strong, car runs better and pulls better. I was expecting 370 or more, but oh well. I guess I need to save up for a better cam and heads.
Here are the mods:
ram air hood
descreened maf
k & n FIPK
throttle body bypass
comp cams xr269hr cam (216/220, .528/.532, 114 lsa)
titanium retainers
hardened push rods
comp 26918 springs
pacesetter long tubes
3in off road y pipe
80 series flowmaster
ls1edit tuning from carolina auto masters
I gained 13 horse from the tune, but counting tune and cam i have gained 32rwhp. Not to bad. Looking at LS6 heads and fm13 cam now.
Here are the mods:
ram air hood
descreened maf
k & n FIPK
throttle body bypass
comp cams xr269hr cam (216/220, .528/.532, 114 lsa)
titanium retainers
hardened push rods
comp 26918 springs
pacesetter long tubes
3in off road y pipe
80 series flowmaster
ls1edit tuning from carolina auto masters
I gained 13 horse from the tune, but counting tune and cam i have gained 32rwhp. Not to bad. Looking at LS6 heads and fm13 cam now.
#3
10 Second Club
iTrader: (5)
Join Date: Nov 2003
Location: Ft. Lauderdale, FL
Posts: 1,649
Likes: 0
Received 0 Likes
on
0 Posts
You can see about 10 hp gain by adding a Flow master Merger (3" into 3.5") into your ORY. Also, the Flowmaster muffler don't real well. Might want to add a cutout or a stright thought mufler. All the little thinks add up real quick.
#4
TECH Apprentice
Thread Starter
iTrader: (15)
Join Date: Nov 2003
Location: Junction City, Kansas
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
I was already considering the cut out. I have thought about chambered muffleres also, but not from GMMG, any insight on that?
Last edited by my01camaroz28; 04-07-2005 at 04:39 PM.
#7
TECH Apprentice
Thread Starter
iTrader: (15)
Join Date: Nov 2003
Location: Junction City, Kansas
Posts: 399
Likes: 0
Received 0 Likes
on
0 Posts
What is so wrong with Flowmaster. I hear that all the time. It is tested and respected. I am not going to put out $700 for some pipe that GMMG stamped their name to. I may get chambered exhaust in the coming years, but not from them. It is to expensive and I am not going to buy just a name.