What length pushrods??
04-21-2005, 07:20 PM
#2
853 heads...unmilled???
7.4 stock length... -.030 smaller base circle cam
*edit for my tired brain*see 2 posts down
and if you want to be really picky you can look at your cam card..or better yet actually measure the base circle and order custom length pushrods(really expensive)
7.4 stock length... -.030 smaller base circle cam
*edit for my tired brain*see 2 posts down
and if you want to be really picky you can look at your cam card..or better yet actually measure the base circle and order custom length pushrods(really expensive)
Last edited by soundengineer; 04-21-2005 at 07:39 PM.
04-22-2005, 05:29 PM
#7
On The Tree
Join Date: Nov 2003
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by soundengineer
yeah... 7.400 is fine....
but 7.425 is the closest you can get off the shelf...might have to do a little searching through the sponsors---------------->
but you can get them from a few of them...just cant remember who carries them
but 7.425 is the closest you can get off the shelf...might have to do a little searching through the sponsors---------------->
but you can get them from a few of them...just cant remember who carries them
Pretty sure Thunder racing has a big selection of pushrods. Think they have 7.425".
Joe