Casting #241 heads....

Reply Subscribe

Thread Tools

Search this Thread

May 2, 2005 | 02:29 PM

jaxnorth

Thread Starter

Teching In

Joined: May 2005

Posts: 48

Likes: 0

Casting #241 heads....

Can someone tell me if these are the standard heads for a 2002 Z/28? I have seen other references that they are corvette heads. The car I purchased was from a dealer and I have no way of contacting the original owner to find out if he swapped heads or not. I would also like to know if there is anyway to tell if I have the Z/06 intake as well.

Thanks in advance...............

May 2, 2005 | 02:40 PM

BrentB@TEA

TECH Enthusiast

Joined: Dec 2004

Posts: 576

Likes: 0

From: Chattanooga

yes they came on 2002 cars and yes the intake is more than likely an ls6.. good chance the Block is an ls6 also.

May 2, 2005 | 03:03 PM

jaxnorth

Thread Starter

Teching In

Joined: May 2005

Posts: 48

Likes: 0

What are the casting numbers of LS6 heads? Would there be a big difference to bolt those on, or just port and polish my #241 castings?

Thanks.............

May 2, 2005 | 03:06 PM

BriancWS6

10 Second Club

iTrader: (18)

Joined: Mar 2004

Posts: 3,910

Likes: 1

From: The Garage

Those 241 heads are stock for your 02 model, as well as the LS6 intake. 01 and 02 cars ALL had the LS6 intake. And as BrentB@TEA said, there's a good chance it could even be an LS6 block.