i just want it to run correctly
will solid engine mounts cause any problems?
will solid engine mounts cause any problems? i am putting solid engine mounts on my 67 conversion and i want to be sure that i will have no issues. i am a little worried about the knock sensor. so will i have any trouble?
thanks
chris
thanks
chris
Originally Posted by GuitsBoy
potential false knock. Banging exhaust has been known to trip the knock sensors.
You might seriously consider poly mounts, I have them and they work quite well. Trending Topics
i have solid motor mounts and the car doesn't shake anymore than any other car, the motor is completely still. you couldn't even tell i have them unless i told you. I bet all these guys sayin this and that about them have never actually had them.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
prothane mounts from thunder racing here as well, when the car is running the hood open, the sound is the only thing telling you its running. it sits DEAD still, and the shifter doesnt move all around anymore either.
i HIGHLY recommend them
i HIGHLY recommend them
I have a set of Spohn solid mounts to go in sometime in the next few days. So I can't tell you what they are like, but the people I've talked to say the vibes aren't so bad. LS1's are quite smooth running engines. There probably isn't alot of difference between solid and poly, except that the solid's are about 15 lbs lighter. With solid mounts, you eliminate those two big cast iron perches that the rubber mounts sit on.
