Any A4 running Comp Cam 216/220...what rpm is your idle set at?
05-15-2005, 08:30 AM
#21
Launching!
Thread Starter
Join Date: Jan 2002
Location: Monticello, MN
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by highgear
I had that Cam put in almost 2 years ago At RPM in Texas. Chris Robinson (OBSSSD) did the tuning and idle was set at 750 in drive, park and neutral. It handles the AC just fine, gets decent mileage and drives good. Has only a slight lope.
That's good to hear. I had been thinking about trying 725 to 750. Did you try anything lower than 750, or did the car have a hard time with that? Thanks!
Ed
05-16-2005, 10:57 AM
#22
Launching!
Join Date: Jan 2003
Location: Saginaw, MI
Posts: 228
Likes: 0
Received 0 Likes
on
0 Posts
Have this cam on the shelf, can't wait to get it in the camaro. Did everyone use 7.4 pushrods or 7.425. Think I will like the tire smoking touqe down low on this cam.
05-16-2005, 04:36 PM
#23
Launching!
Thread Starter
Join Date: Jan 2002
Location: Monticello, MN
Posts: 224
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DJ_951
Have this cam on the shelf, can't wait to get it in the camaro. Did everyone use 7.4 pushrods or 7.425. Think I will like the tire smoking touqe down low on this cam.
Ed
08-18-2005, 08:55 AM
#25
11 Second Club
Join Date: Jul 2004
Location: Sydney, Australia
Posts: 121
Likes: 0
Received 0 Likes
on
0 Posts
Idle My car idles at 675rpm in gear.
It has the XR269HR and YT1.8 rockers.
Has run 11.765/115mph with a Yank SS3600, MT ET streets and 3.73 gears at 3625lb. 60 footer 1.622
Gets 25-28mph on a gentle cruise at 50-70mph.
It has the XR269HR and YT1.8 rockers.
Has run 11.765/115mph with a Yank SS3600, MT ET streets and 3.73 gears at 3625lb. 60 footer 1.622
Gets 25-28mph on a gentle cruise at 50-70mph.
