leak down test
leak down test hey guys my fiances hundai is crapping out lol what a surprice, o and by the way she got it before we met other wise she wouln't have it, not if i had something to say about it lol. anyways i wanna do a pressure test, where do i get the tool, discount?? also i never done a silinder leak down test or what ever is called how do i do this what other tools will i need, could someone please break this down for me.
TECH Junkie
Joined: Dec 2001
Posts: 3,242
Likes: 0
From: Lakeland, FL
My tavia one works pretty well but I wish there was some way to make the hose shorter or at least have a short peice that was easy to plug into the spark plug holes and then quick connect to a longer hose.
hey guys whast the difference between a dual gage tester, and a single gage tester casue the one at summit are like $90, and autozone has some single gage compression testers for like $30 plus they also loan them out for free.
TECH Resident
Joined: Oct 2004
Posts: 800
Likes: 1
From: Simi VAlley,CA
The dual gauge tester shows air "line" pressure on one side and your pressure drop on the other.....the single gauge requires you to set your line pressure at a given number (like 100 psi) and when you actually perform the test the same gauge will drop to show you the "leakage" figure. Rocket science.
Originally Posted by Oscar Will
The dual gauge tester shows air "line" pressure on one side and your pressure drop on the other.....the single gauge requires you to set your line pressure at a given number (like 100 psi) and when you actually perform the test the same gauge will drop to show you the "leakage" figure. Rocket science.
Trending Topics
Not 100% sure on how you do a leak down test. I think you need an air compressor, fill the cylinder up with air and see how it holds the pressure.
A compression test on the other hand is simpler but doesnt tell you as much. You just put the pressure gague in the cilynder and turn it over, and see how much pressure it builds.
A compression test on the other hand is simpler but doesnt tell you as much. You just put the pressure gague in the cilynder and turn it over, and see how much pressure it builds.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Originally Posted by calongo_SS
Not 100% sure on how you do a leak down test. I think you need an air compressor, fill the cylinder up with air and see how it holds the pressure.
A compression test on the other hand is simpler but doesnt tell you as much. You just put the pressure gague in the cilynder and turn it over, and see how much pressure it builds.
A compression test on the other hand is simpler but doesnt tell you as much. You just put the pressure gague in the cilynder and turn it over, and see how much pressure it builds.
