TSP Cam Dyno results are in!
The mods -
jet hot LT's, ory pipe, slp loudmouth, whisper lid, asp pulley, and TSP torquer cam (233/233 589/589 112 lsa)
this was with the stock throttle body and stock MAF.
it made 411 RWHP and 380 RWTQ
i was happy
Ive got a TSP 231/237 cam, CHS stage II heads milled .030, Mac midlengths, stock TB, and a lid.
When it was tuned MTI could only get 403 hp 376 tq. out of it
Very impressive with your numbers though, I wish I could say the same!
see ya!!
Zach
Trending Topics
The Best V8 Stories One Small Block at Time
see ya!!
Zach
The mods -
jet hot LT's, ory pipe, slp loudmouth, whisper lid, asp pulley, and TSP torquer cam (233/233 589/589 112 lsa)
this was with the stock throttle body and stock MAF.
it made 411 RWHP and 380 RWTQ
i was happy

congrats on teh #'s!!! damn i really need to get an LS6 intake and UD pulley!
Ive got a TSP 231/237 cam, CHS stage II heads milled .030, Mac midlengths, stock TB, and a lid.
When it was tuned MTI could only get 403 hp 376 tq. out of it
Very impressive with your numbers though, I wish I could say the same!
Macs are known to make better peak #'s and LTs provide slightly better trq #'s and HP #'s under the curve.
Of course if you go with the best of best at $1300>1800 with y's (QTP/Kooks)
But that is steep in my book for 10HP or so.
IMO a good set of 5.3L stage 2's would be better bang for the $$.


I have the same cam in my car. Numbers are below 