Which Eagle rods (part#) for these diamond pistons?
06-22-2005, 08:30 PM
#1
Launching!
Thread Starter
iTrader: (4)
Join Date: Jun 2003
Location: valley village, los angeles
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Which Eagle rods (part#) for these diamond pistons? I started buying parts for my shortblock and I'm not sure on the part # for the correct eagle h-beam rods. I currently have Diamond Pistons LS1 Forged Flat Top Piston set w/ -8.6cc Valve Reliefs 3.905" BORE / 3.622" Stroke / 6.125" Rods / 1.314" Comp Height / .927 x 2.500 Wrist Pins. Which Eagle rods are the right ones?...here are the summit part#'esp-6100L3d
thanks for any help esp-6125b3d
MIke
thanks for any help esp-6125b3d
MIke
06-22-2005, 08:58 PM
#2
TECH Addict
iTrader: (59)
Join Date: Oct 2004
Location: Vance, Alabama
Posts: 2,357
Likes: 0
Received 0 Likes
on
0 Posts
The Eagle rods that are 6.125 are for SBC and are too thin on the big end, this will give excessive rod side clearance. The only rod Eagle makes for the LS1 is the 6.100
