Edelbrock/Lingenfelter LS1 Head Images
#23
TECH Enthusiast
Join Date: Dec 2004
Location: Chattanooga
Posts: 576
Likes: 0
Received 0 Likes
on
0 Posts
We just got ours in. I must say it is a very nice looking casting. The combustion chamber is very nice from a porters standpoint. I will post some numbers as soon as we get a port done for them.
#25
Originally Posted by BrentB@TEA
We just got ours in. I must say it is a very nice looking casting. The combustion chamber is very nice from a porters standpoint. I will post some numbers as soon as we get a port done for them.
#28
9-09-05
Edelbrock LS1 Pro-Port castings, #61989, are in the shop and will be on the shelf next week, due 09/16/05
At the same time, casting will be sent to Lingenfelter, where they will work their magic on the Edelbrock/Lingenfelter CNC, complete, #61969.
Thank you,
Jason.
Edelbrock LS1 Pro-Port castings, #61989, are in the shop and will be on the shelf next week, due 09/16/05
At the same time, casting will be sent to Lingenfelter, where they will work their magic on the Edelbrock/Lingenfelter CNC, complete, #61969.
Thank you,
Jason.
#32
Banned
iTrader: (23)
Originally Posted by Pro Stock John
Will any come in 70-74cc chambers? I'm looking for a set of aftermarket casting for my Formula.
John hate to keep harping but ET is looking like your best bet. You will really benifit with the larger chamber that nobody else offers. Honestly 225ccs is too small for what your doing.
This is why many are having good luck with All Pro Heads. They are 235ish out of the box and many are spending an additional 1500-2000 to open them up more and assemble the heads.
#35
TECH Resident
Join Date: Oct 2004
Location: TAMPA by way of MIAMI!!!
Posts: 807
Likes: 0
Received 0 Likes
on
0 Posts
So what nobody wants to know about these heads? Are we only talkin about the Darts now? I'm thinkin the prices are goin down across the board.......
#38
Banned
iTrader: (23)
Originally Posted by jasonsny
9-09-05
Edelbrock LS1 Pro-Port castings, #61989, are in the shop and will be on the shelf next week, due 09/16/05
At the same time, casting will be sent to Lingenfelter, where they will work their magic on the Edelbrock/Lingenfelter CNC, complete, #61969.
Thank you,
Jason.
Edelbrock LS1 Pro-Port castings, #61989, are in the shop and will be on the shelf next week, due 09/16/05
At the same time, casting will be sent to Lingenfelter, where they will work their magic on the Edelbrock/Lingenfelter CNC, complete, #61969.
Thank you,
Jason.
Still no price? Its the 16th.
#39
12 Second Club
iTrader: (1)
Join Date: May 2005
Location: Bradenton, FL
Posts: 684
Likes: 0
Received 0 Likes
on
0 Posts
Are these the same heads?
http://www.lingenfelter.com/Merchant...Category_Code=
$1500, plus $170 for 2.02, 1.57 valves, plus $400 for high lift springs, plus $300 for hand finishing......
Not so bad of a starting price, but they get expensive REALLY quickly.
http://www.lingenfelter.com/Merchant...Category_Code=
$1500, plus $170 for 2.02, 1.57 valves, plus $400 for high lift springs, plus $300 for hand finishing......
Not so bad of a starting price, but they get expensive REALLY quickly.