More aggressive lobe.....Cam Motion or XER?
#1
10 Second Club
Thread Starter
iTrader: (47)
Join Date: Nov 2001
Location: Pace, FL
Posts: 1,453
Likes: 0
Received 0 Likes
on
0 Posts
More aggressive lobe.....Cam Motion or XER?
Looking for the some info in regards to the ramps and aggressivness of the lobes on the two grinds. Any input is appreciated!
John
John
#3
TECH Senior Member
Ramp rate on XE-R is 49
From a previous point on a Cam Motion custom we were able to determine that intake rate at 50 and exht at 51
XE rate is 53
So according to that cam it was in between. ( The difference in intake /exht made us assume that this was one of the reasons for the FM cams to have a little of both worlds {good down low/ well mannered and kick *** numbers up high})
From a previous point on a Cam Motion custom we were able to determine that intake rate at 50 and exht at 51
XE rate is 53
So according to that cam it was in between. ( The difference in intake /exht made us assume that this was one of the reasons for the FM cams to have a little of both worlds {good down low/ well mannered and kick *** numbers up high})