TR224 and Comp Cams 1.85 compatability

Reply Subscribe

Thread Tools

Search this Thread

Aug 28, 2005 | 09:33 PM

1 Clean WS6

Thread Starter

Teching In

iTrader: (1)

Joined: Nov 2004

Posts: 33

Likes: 0

From: Marietta GA

TR224 and Comp Cams 1.85 compatability

Hey guys.

I have a TR224 on a 112 and 862 code heads that have been CNC'd and hand polished. The heads have not been milled and are fitted with Manley 2.02 and 1.60's and will soon have their 941's swapped out for 918's with Ti retainers.

I was wondering if anyone has experience with this cam / rocker (Comp 1.85's) combo??

Thanks
Mike

Aug 29, 2005 | 04:39 AM

roadrash9r

On The Tree

iTrader: (2)

Joined: Mar 2005

Posts: 108

Likes: 0

From: FORT WALTON BEACH

dont do it!!!! the ramp rates are to fast and your Piston to valve clerance will be too close!!!! I did the 1.75 and my lift came out to .579. With 1.85 it will be around .612 too much with out fly cutting.