Anyone use et performance heads?
Thread Starter
8 SEC SLOPPY SHOT!!!
iTrader: (15)
Joined: Oct 2002
Posts: 1,862
Likes: 0
From: lombard,IL
Anyone use et performance heads? Im just curious if anyone has a set of there heads.Do they have there own house cylinder head?I only seen a list of other heads and there flow numbers.I would like to hear some input on these heads since im looking to be getting a set in the near future.I was thinking afr225 now im hearing about these heads. 
ETP has there own casting of heads, just like AFR, edlebrock, ect. Search there recent thread as they've got all the specs, flow numbers, available options, pics, ect.
from what i've seen they look to be a really great head.
from what i've seen they look to be a really great head.
They have a new set of heads,
and the intake port volume to match any build.
I have the small 5.3 heads and look to upgrade to the new 225 head on my 346
for a 402 240 and an all out 427 would take the 265's
The c5r guys they have a head that flows way up there ,talk to Craig.
Craig @ ETPerformance
E-mail Address(es):
craig@etheads.com
John Sr.
and the intake port volume to match any build.
I have the small 5.3 heads and look to upgrade to the new 225 head on my 346
for a 402 240 and an all out 427 would take the 265's
The c5r guys they have a head that flows way up there ,talk to Craig.
Craig @ ETPerformance
E-mail Address(es):
craig@etheads.com
John Sr.
I have a set of the Race 265's on order, I talked to cary last week and they were ready to cut the seats and install the valves, I should be getting them pretty soon, I will post pics and info when they show up
Originally Posted by Blown408
I have a set of 225's on order.. They should be arriving this week. I hope so anyway, I have been waiting for over 2 months..
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
8 SEC SLOPPY SHOT!!!
iTrader: (15)
Joined: Oct 2002
Posts: 1,862
Likes: 0
From: lombard,IL
Originally Posted by Blown408
I have a set of 225's on order.. They should be arriving this week. I hope so anyway, I have been waiting for over 2 months..
Guys...
Our foundry kind of hung us up recently on the LS1 raw castings (a delay of over four weeks)....We are going to have a bunch of CNC machiines running 24-7 to catch up starting the end of this week and all thru the following weeks ahead. You will be seeing them shortly....feel free to check with your AFR sales Rep and have them do a status check. Production is very aware of LS1 back-orders and they will be expedited moving thru the shop.
Sorry about the delays...they will be worth the wait.
Tony M.
Our foundry kind of hung us up recently on the LS1 raw castings (a delay of over four weeks)....We are going to have a bunch of CNC machiines running 24-7 to catch up starting the end of this week and all thru the following weeks ahead. You will be seeing them shortly....feel free to check with your AFR sales Rep and have them do a status check. Production is very aware of LS1 back-orders and they will be expedited moving thru the shop.
Sorry about the delays...they will be worth the wait.
Tony M.
Originally Posted by tuff
What heads did you get?
Oh just a set of the 215's and a set of the 225's. Oh and maybe even a set of 240's.
Craig if you read this I havent heard back from you as I called and left a message.
Originally Posted by Tony Mamo @ AFR
Guys...
Our foundry kind of hung us up recently on the LS1 raw castings (a delay of over four weeks)....We are going to have a bunch of CNC machiines running 24-7 to catch up starting the end of this week and all thru the following weeks ahead. You will be seeing them shortly....feel free to check with your AFR sales Rep and have them do a status check. Production is very aware of LS1 back-orders and they will be expedited moving thru the shop.
Sorry about the delays...they will be worth the wait.
Tony M.
Our foundry kind of hung us up recently on the LS1 raw castings (a delay of over four weeks)....We are going to have a bunch of CNC machiines running 24-7 to catch up starting the end of this week and all thru the following weeks ahead. You will be seeing them shortly....feel free to check with your AFR sales Rep and have them do a status check. Production is very aware of LS1 back-orders and they will be expedited moving thru the shop.
Sorry about the delays...they will be worth the wait.
Tony M.
What does this have to do with the topic in this thread?
Maybe a new pill is needed as the bule pill is starting to effect your reading.
castings
Originally Posted by tuff
Are they buyng raw castings and doing there own cnc on the heads?Are they able to do the smaller chambers on them.I see your fi so im sure you don't want a small chamber just curious if the question has came up.
We have our own casting. It has nothing to do with anybody elses casting. We designed our own tooling to accomidate all of our different versions. We have revised coolant holes through the deck to minimize movement as well. Chamber volume is avalible from 35 to 74cc, without sacrificing the integrity of the deck.
AFRs still waiting I ordered a set of AFR 205s on 8/23 .but i cant figure out whitch cam to use i have two cams a brand new a Lunati 221/221 @.050 with .558/.558 at valve 112 center or a comp cam XER .236/.236 @.050 with .589/.589 at valve on 112 centerline .Cant wait also can i use my stock rockers for a few weeks till i get money for new ones?
Thread Starter
8 SEC SLOPPY SHOT!!!
iTrader: (15)
Joined: Oct 2002
Posts: 1,862
Likes: 0
From: lombard,IL
Well i talked to them today and they sent me some pics of there heads and all i can say is im sold 
ETP i think is going to be the guys ill be dealing with.They have a very serious head and they can make a set of heads it fit anybodys setup.There a little more than a afr but what the hell if your going to spend that much money whats a little more.
ETP i think is going to be the guys ill be dealing with.They have a very serious head and they can make a set of heads it fit anybodys setup.There a little more than a afr but what the hell if your going to spend that much money whats a little more. 
I'll order mine tomorrow! I was told my small chamber afr's would be ready last December! We'll see how long these take. Thanks for doing the research Tuff. I think LME is a dealer but I can't get a price from Bryan after one month????