requesting pics of the vertical pcv mod
TECH Regular
Joined: Feb 2004
Posts: 438
Likes: 0
TECH Enthusiast
Joined: May 2005
Posts: 689
Likes: 0
From: Perth, Australia
Ok here is my guess.
By hanging the valve vertically the valve is more likely to seat correctly and not leak through.
Gravity will be working axially to the valves moving parts.....as per at right angles originally.
Sure the moving parts are only light but it may make a noticeable difference especially if the valve or spring has been known to "hang-up".
By hanging the valve vertically the valve is more likely to seat correctly and not leak through.
Gravity will be working axially to the valves moving parts.....as per at right angles originally.
Sure the moving parts are only light but it may make a noticeable difference especially if the valve or spring has been known to "hang-up".
