I just got my Torquer 2 cam installed today and I couldnt be happier It fired right up with good oil pressure and was surprisingly pretty easy to idle . The driveability is much better than what everyone told me it would be like

I fired it up and took a few short cruises around the block then about 15 minutes later I drove 40 miles through stop and go traffic with it, I did stall it three times but after tuning this cam is going to be completely driveable; it feels as if i havent lost much if any low end too

Big thumbs up to the guys at TSP I love the way this thing sounds at idle, its got a real nice lope to it but still isnt too radical at the same time. I know I have to get sound clips and believe me, i'll be working on it

 

nice. maybe ill run into you out here

im in fallbrook

 

sounds!!!! here just put it in this past weekend. vid with open cutout base line tune leaving easy on stock good years http://media.putfile.com/charelstorqer2cam

 

Damn, that sounds awsome man. I can't wait to get one of those cams in my 05 GTO.

 

you are my hero man! ive been asking about a sound clip of this cam for a while! sounds awesome! any chance you can do one through the exhaust? im curious of that too.

 

I have an off the shelf Comp Grind 232/234 .595/.598 I installed about a month ago. I have been tuning it this past week. All I can say is tuning will wake the beast. The cam is the best of low, mid, and peak power. I still have to add in timing and PE tuning, but just part throttle tuning has helped idling and low rpm cruising.

I hope to get a sound clip soon. It sounds deep and aggressive at light throttle and just roars at anything above 3 grand.

Congrats on the install and Good luck with tuning. Let us know how it does.

Dave

 

I have the same cam also. Just bought it 2 weeks ago and had it installed within the next few days. When I went to get it tuned, the a/f wasnt too far off (13.5, now its 12.7-12.8). It needed a little help on idling, idles fine now for the most part, and only took it to 6400 on the dyno... made 375/364. It's a great cam, I like it so far. Heads, and a ls6 intake are on the list but not happening this year

 

dont get discouraged..once you get the intake, it will really wake up!
nice vid! that thing has some chop to it!

 

I hope it does. clutch/flywheel/slave, etc is first on the list (its slipping pretty good now that I've dogged it pretty good), ls6 intake, then suspension mods.

 

You car sounds kick ***!

Thats the sound i'd like to have for my camaro. Sounds great.

 

By thats a nice 35th Anniv. SS you got their.

 

congrats. its a great cam, i love mine

 

can anyone tell me how does it react to stock engine with all the bolt on's

 

Sounds great!

 

his sig does say cam only

 

reacts nice look at sig. that is through 10 bolt