Swapping heads, cam...pushrod length question
10-25-2005 | 07:43 AM
#1
Thread Starter
10 Second Club
iTrader: (2)
Joined: Dec 2004
Posts: 1,386
Likes: 1
From: Sumter, South Carolina
Swapping heads, cam...pushrod length question I'm lucky enough to be getting AFR 205 heads to swap into my stock 2000 Z/28 to go along with my FMS 13 cam. We purchased the kick *** install kit with Manley springs etc...the one unknown quantity so far is PushRod length. Should the pushrods that I got before I got head work with the AFRs or do you think after we mock up a cyl...we'll find a length difference. BTW Futral and TTP have been very helpful - I recommend both companies highly.
(I just reread this and am still cracking up...i'll let it stand!)
(I just reread this and am still cracking up...i'll let it stand!)
10-25-2005 | 08:15 AM
#3
Thread Starter
10 Second Club
iTrader: (2)
Joined: Dec 2004
Posts: 1,386
Likes: 1
From: Sumter, South Carolina
Originally Posted by orangeapeel
are they 7.350 or 7.400? And Headwork, I assume you mean milling since you are talking about PR length.
Milling ? No metal work planned.
Replacing stock heads with off the shelf AFR 205s
Last edited by Macon; 10-25-2005 at 08:27 AM.