Quick pistons QUESTION!
Thread Starter
TECH Addict
iTrader: (24)
Joined: May 2005
Posts: 2,045
Likes: 4
From: Fort Worth, TX
Quick pistons QUESTION! Hello Everyone,
Been trying to find this information for quite sometime to no avail....
Basically, have 2.055/1.57 valves on a stock deck LS6 castings. Couple questions.
1. What is the deck thickness of the STOCK pistons from a 2001 LS1.
2. What is the Maximum depth that you can cut into the piston and still retain integrity on a NA application with those 2.055/1.57 valves.
3. Someone in my post in the Advanced Tech section mentioned that you need to use valves that are 2 sizes larger then the one you have...what does that mean, and how does it affect the distance of flycutting?
Thanks,
Adrian
Been trying to find this information for quite sometime to no avail....
Basically, have 2.055/1.57 valves on a stock deck LS6 castings. Couple questions.
1. What is the deck thickness of the STOCK pistons from a 2001 LS1.
2. What is the Maximum depth that you can cut into the piston and still retain integrity on a NA application with those 2.055/1.57 valves.
3. Someone in my post in the Advanced Tech section mentioned that you need to use valves that are 2 sizes larger then the one you have...what does that mean, and how does it affect the distance of flycutting?
Thanks,
Adrian
