roller rockers???
roller rockers??? I have a 98 m/6 z-28 and I am going to be running the stage 2 PP ls6 heads, TSP torquer cam. The springs I have are the patriot gold. I think my rockers are close to being done and I want to get something that will be able to handle the new power without any problem... I also want to spint the motor about 6500 rpm's, what do you all recommend that I do in the top-end for this?
I just want to get the rockers alone...all I could find was the kit...thanks for the link though, I maybe getting that punisher kit. Not happy with my suspension set-up, and my SFC have hit a couple bumps.
you can buy them seperately. thing is, you need shorter pushrods to use them. if all is stock as far as heads and gaskets (not milling of the heads and such), you'll need .150 shorter ones. these make the valve train adjustable.
i have most of the punisher suspension set up on the wife's car.
i have most of the punisher suspension set up on the wife's car.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
