T-Rex Cam - what else do I need?
T-Rex Cam - what else do I need? I have lt's, a 4k stall from Yank and the manley dual springs, dual titaniam retainers, hardened 7.4 pushrods etc. and also am getting arp rod-bolts. Do I need anything else to run this cam?
screw the bottom end, if you are on a 10bolt rear end, get ready to go boom.
Forgot to mention, and this is VERY important, its a must
Get a ported ls6 oil pump AND A NEW O-RING from thunder racing or some other sponsored shops
Forgot to mention, and this is VERY important, its a must
Get a ported ls6 oil pump AND A NEW O-RING from thunder racing or some other sponsored shops
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Well, I didnt say that it would "break" but ARP bolts should be fine. The rods can handle that sort of speed. I would do it on stock rod bolts just because though... 
But some people do have a freak 10 bolt that hangs in there way longer than the avg.
But some people do have a freak 10 bolt that hangs in there way longer than the avg. 
TECH Apprentice
Joined: Mar 2005
Posts: 368
Likes: 1
From: Raleigh,NC
I want this TREX cam in my ride in 2006,but I like to know who do you think have the best dual spring kit for this type of cam.Comp Cam have the kit at a price of $500,Patriot and Texas Speed have around 200 or 300 buck.Thats my sticken point of which dual spring kit I want.
Patriots are great. The kit is around $250, and you get everything you need, new bases, seals, retainers, and locks. Aside from what you have listed, you need all the replacement gaskets, bolts and tools if you're doing the work yourself.
