what would be a good cam from FMS to match up with a yank ss3600 converter with 3.23 gears. I already have all suporting mods minus the pulley.

 

Fm 11, Fm 13, Fm 14

 

thanks predator so you dont think the stall is to small

 

Nope, I run a Torquer V2 (similar to FM 14) and I have a VIG 3200.
Granted for the track NA I could use a higher stall, but for street/strip and juice it is plenty.
As long as your shift extentions fall close to Hp peak range of the cam you are fine.

 

thanks my shift extention falls to about 4500 rpms . thanks again predator