Heads question

Reply Subscribe

Thread Tools

Search this Thread

Jan 19, 2006 | 06:22 PM

foshizl

Thread Starter

On The Tree

Joined: Jul 2004

Posts: 167

Likes: 0

Heads question

Are AFR heads worth the money, im looking for a good pair of heads to go with about a 224/224 cam... the afrs look nice, especially with the thicker deck. any info would help. also... what is the different between 5.3l heads and the 5.7l heads

Jan 19, 2006 | 06:49 PM

Lithium

SSU's Drunk Typing Whore

iTrader: (47)

Joined: Jan 2004

Posts: 4,608

Likes: 0

Higher compression.

Jan 19, 2006 | 06:51 PM

orangeapeel

ЯєŧąяĐ Єl¡m¡иąŧøя ™

iTrader: (18)

Joined: Nov 2004

Posts: 16,083

Likes: 4

From: Justin, TX

Are you looking for lower compression for any reason? You said that you like the deck height on the AFR's so i wasn't sure where you were going after the 5.3 and 5.7 question.

Jan 26, 2006 | 01:46 PM

foshizl

Thread Starter

On The Tree

Joined: Jul 2004

Posts: 167

Likes: 0

well, at this point im not looking for a reason to run low compression.. ill be using nitrous however... i thought part of the concept of a thinker deck was to prevent a head from warping

Jan 27, 2006 | 01:24 AM

NoGamesLS1

TECH Resident

iTrader: (16)

Joined: Jul 2005

Posts: 800

Likes: 0

if your using nitrous then you want high compression. i just bought some livernois ls6 heads for under 1k shipped. And that was assembled with springs up to a .580 lift. the look good. not installed yet.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last