Anyone using a Patriot cam?
04-25-2006, 04:41 PM
#21
TECH Addict
iTrader: (18)
Join Date: Jun 2004
Location: WI
Posts: 2,247
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Zitty'sZ
Gross valve lift Intake exhaust DURATION AT .050 226/226
585* 585*
Duration at .006
tappet lift 276 * 272*
Valve timing
at .050 INTAKE OPENS AT 5* BTDC CLOSES AT 43*ABDC
EXHAUST OPENS AT 45*BBDC CLOSES AT 1* ATDC
ICL=109*
LSA=112
This acording to the spec sheet I got from Gunnar.
585* 585*
Duration at .006
tappet lift 276 * 272*
Valve timing
at .050 INTAKE OPENS AT 5* BTDC CLOSES AT 43*ABDC
EXHAUST OPENS AT 45*BBDC CLOSES AT 1* ATDC
ICL=109*
LSA=112
This acording to the spec sheet I got from Gunnar.
04-26-2006, 09:32 PM
#22
I have the Patriot 232/230 cam in my GTO. I love this cam. You'll need a decent tuner to get it to run good but I am making around 390rwhp and 370rwtq with it goin through a set of longtubes and dual 3" exhaust. I still have room for tuning as I am running rich still..(The MAF does not like the duration)
It has a choppy *** idle though. (I absolutely love it) But alot of people wont like it and it is my daily driver. (Although I have other cars, so i dont have to drive it everyday)
It has a choppy *** idle though. (I absolutely love it) But alot of people wont like it and it is my daily driver. (Although I have other cars, so i dont have to drive it everyday)
04-27-2006, 02:23 PM
#24
12 Second Club
iTrader: (10)
Join Date: Sep 2005
Location: From Ohio now in that state up north
Posts: 948
Received 0 Likes
on
0 Posts
My buddy has the 226 cam and there heads on his car right now we still arent done tunning it but it runs pretty well. Also partiot can afford to sell the cams so cheap because they mass produce them hence only 2 cam choices they just crank them out and you save because of it.
05-09-2006, 06:59 AM
#27
TECH Regular
iTrader: (5)
Join Date: Apr 2006
Location: Pittsburgh, PA
Posts: 478
Likes: 0
Received 0 Likes
on
0 Posts
i just installed the 232/230 cam in my T/A and all i can say is WOW... it sounds rediculous... just like the GTO owner above, its my DD, but i like a nice lope... driveability issues don't bother me... considering i have an LT1 untuned b/c of an unknown cam... i still have yet to get it tuned.. i'm giong to get a mail-order tune from PCMforLess.com ... they did a great job with my LT1, and he said he has fooled around with some very similar cams on the dyno lately, so he should be able to get me real close....
as far as degreeing the cam, i dunno how my buddy did it.. i'll have to ask..
but back on topic.. the cam sounds bad-***! actually have only started the car (last night), still not run it, so i can't comment on power... can't wait tho!
as far as degreeing the cam, i dunno how my buddy did it.. i'll have to ask..
but back on topic.. the cam sounds bad-***! actually have only started the car (last night), still not run it, so i can't comment on power... can't wait tho!
10-28-2006, 05:40 PM
#31
11 Second Club
iTrader: (10)
Join Date: Dec 2005
Location: Finksburg, MD
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Figured I would resurrect this thread to see if anyone had any more info about the patriot 226/226. I've been searching for hp #s or 1/4 mile times but couldn't find anything and i'm trying to decide between this or a tr224/112.
10-31-2006, 05:39 AM
#35
TECH Apprentice
iTrader: (2)
Join Date: Jul 2004
Location: Mission, TX
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
see this thread...I just posted about my experience with the 226/226 112
https://ls1tech.com/forums/generation-iii-internal-engine/600928-comp-xr-xer.html
I'd say go for it man
https://ls1tech.com/forums/generation-iii-internal-engine/600928-comp-xr-xer.html
I'd say go for it man
11-03-2006, 02:29 PM
#37
TECH Apprentice
iTrader: (2)
Join Date: Jul 2004
Location: Mission, TX
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 98-LS1
Any sound clips on the 226/226?
I could do an Idle/Rev clip for now while it's up there..I'll do it later this afternoon guys...
11-03-2006, 08:47 PM
#38
TECH Apprentice
iTrader: (2)
Join Date: Jul 2004
Location: Mission, TX
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Here is an idle/rev clip I just took...
http://www.youtube.com/watch?v=t_il6f-_2b4
I know it's low quality but all I have is a digital camera that is mainly fo taking pictures, but allows you to take 23 second videos...that's why you see me running up to jump in lol...
It's also very dark and cold outside..hence the smoke..
I'll take some better vids once I get the tires on...in the daytime lol.
Maybe I'll do a couple flybys, etc...
BTW I only reved to like 3K because it's late and my neighbors suck...
http://www.youtube.com/watch?v=t_il6f-_2b4
I know it's low quality but all I have is a digital camera that is mainly fo taking pictures, but allows you to take 23 second videos...that's why you see me running up to jump in lol...
It's also very dark and cold outside..hence the smoke..
I'll take some better vids once I get the tires on...in the daytime lol.
Maybe I'll do a couple flybys, etc...
BTW I only reved to like 3K because it's late and my neighbors suck...
11-03-2006, 09:00 PM
#39
9 Second Club
iTrader: (7)
Join Date: May 2005
Location: Cabot, AR
Posts: 3,126
Likes: 0
Received 0 Likes
on
0 Posts
Here's a soundclip of the 226/226 in a 2004 Silverado w/ 5.3. Also is a lip of the same vehicle runing about 30-120ish. Cam works great, need about a 3500 stall though.
http://video.performancetrucks.net/v...69011debce.htm
http://video.performancetrucks.net/v...69011debce.htm
11-05-2006, 08:59 PM
#40
TECH Apprentice
iTrader: (2)
Join Date: Jul 2004
Location: Mission, TX
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
btw I also just added a vid of the cam cranking....
http://www.youtube.com/watch?v=S0ZfsUXPzwY
and my GF shot a WOT vid at the track(crappy run though..)
http://www.youtube.com/watch?v=3xOIlclm5zw
Will add more as I get the time...or a video camera
http://www.youtube.com/watch?v=S0ZfsUXPzwY
and my GF shot a WOT vid at the track(crappy run though..)
http://www.youtube.com/watch?v=3xOIlclm5zw
Will add more as I get the time...or a video camera