i was just wondering when doing a heads/cam package what gasket kit to use. im not looking for the latest, high-tech, titanium-polymer, **** just a good all ecompassing kit. hopefully someone can provide me some part numbers. also can someone tell me what belts i need to use my underdrive pulley. i have the slp but i cant imagine the asp would be different. right? they list some part numbers on their site but i wanted to buy from summit as i have a gift certificate and all they carry is goodyear. can anyone help me? sorry for the long post, thanks in advance

 

nobody? nobody can help me out with a part number? thanks...

 

If you don't have egr and air, this is what you should need *(with minor upgrades for convience).

-GM LS1 Front Cover Gasket
-GM LS1 Exhaust Manifold Gasket (2 required)
-GM LS1 Oil Pump to Pick-Up O-Ring (if changing oil pump, which you should do)
-GM LS1 Front Main Seal
-GM Multi-Layer Steel LS1/LS6 Cylinder Head Gasket (99+year body)
otherwise GM LS1 Cylinder Head gasket, graphite (both pass. and driver)
-GM LS1 Intake Manifold Gasket Set
-GM LS1 Valve Cover Gasket, 1999 and up (2 required) (also different if 98)
-GM LS1 Water Pump Gasket, 1999 and up (2 required) (get these even if you have a 98)
-ARP head studs
-GM Balancer Bolt (not reusable) or ARP (reusable)
That's all that I can think of.

All can be had from most of the sponsors.

http://thunderracing.com/catalog/?ac...vid=3&pcid=157

To make it easy get this part number on thunder racing's website:

111-12-LS