Scrappy

I just ordered a FM 11 on a 112 what do those of you who have one think and can I get soem mods and numbers please.

Grey Goat

I also ordered a F11 112 and am curious about others results. I will be stuffing it in an LS2 - anybody done this yet?

Scrappy

Bump to the top

WS6FirebirdTA00

iTrader: (33)

if u want numbers find out in the dyno section. its a great cam

99zman

iTrader: (23)

bump...

Photochop

iTrader: (74)

FWIW, my car put down 348 rwhp thru a tci 4400 convertor. Car's a '99...so 853 heads, ls6 intake, pulley, jethots, y-pipe and hooker catback, stock 10 w/ 3.73s

BUT the car has gone 11.85@115 on et street radials

I love the cam...might even keep it in favor of a larger cam when I slap the new heads on in a couple weeks

BLKWS6

I along with numerous others around here ran thi cam for a long time. Great cam. 400+rwhp with boltons and the cam.

ACCELR8

I love it.

See sig. (note: crappy e.t due to poor driving)

Wicked_Hugger99

iTrader: (1)

I ran the F11 cam on a 114lsa in my 99 Z28 and made 388rwhp & 371rwtq through a 10-bolt w/ 3.42s and a beefed up automatic with a vig3200 locked. Had SLP lid w/ K&N, stock de-screened MAF, LS6 intake, ud pulley, ported tb, free mods, Mac 1 3/4 mid-length hedders, FMS 3in x-pipe w/ bullets turned down before the axle. Tuned by Allan Futral. I loved it cuz it was a great daily driver cam w/ nice street manners & got good MPG yet still had that sweet lopey idle that sounds so good. I'd reccommend that cam for sure!!!!!!!!!!

pdd

iTrader: (3)

when i had it, it worked great

99zman

iTrader: (23)

bump...

INVISIBLEZ

iTrader: (45)

I ran that cam in my car. I made 440 r.w.h.p./ 410 r.w.t.q. through a 12 bolt with 4:10's I had all the supporting boltons. GMPP CNC LS6 heads. My car went 11.35 @ 121 n/a full weight a/c, all accessories, and mild steel 6 point cage. On a 75 shot my car made, 500 r.w.h.p. 525 r.w.t.q. dynoing on 26X11.5X15 ET Streets. That cam is awesome, very streetable!!!!

J2Pharren1

iTrader: (1)

Search for a member called Tally TransAm, he's a friend of mine running the FM11 with some really crappy patriots and a 9", runs mid 11's at 122mph.

99zman

iTrader: (23)

invisiblez, how is the lope of the cam? where dose it peak what rpm? dose anyone have a graph? thanks alot.

INVISIBLEZ

iTrader: (45)

The cam was not really that choppy. I can't remember where the cam exactly peaked @ it pulled great all the way to 6600. Here's a link to my old graph.


https://ls1tech.com/forums/showthrea...8&page=2&pp=20

1999 SS

iTrader: (3)

what are the specs (#'s) on this cam?

Dom

iTrader: (2)

228/230 .576/.595

99zman

iTrader: (23)

invisiblez, thanks alot i wish the graph had rpm not mph??? thanks again, anyone else have a graph?

Scrappy

Here is mine