Cam question...

Reply Subscribe

Thread Tools

Search this Thread

Feb 21, 2006 | 06:34 PM

I <3 80057

Thread Starter

Banned

iTrader: (1)

Joined: Apr 2004

Posts: 614

Likes: 0

From: Desoto, Tx

Cam question...

Car approaching 100k, runs fine. Any suggestions on what other components on the valvetrain MAY need to be replaced if I do a Lunati VooDoo cam swap? I plan on getting LS1edit or similiar software and peripherals to tune it.

Blake

Feb 22, 2006 | 08:28 AM

thunderstruck

TECH Enthusiast

iTrader: (15)

Joined: Apr 2002

Posts: 632

Likes: 0

From: effingham, il

valve springs at minimum, but also suggest pushrods, timing chain, oil pump

Feb 22, 2006 | 08:32 AM

slt200mph

TECH Senior Member

iTrader: (42)

Joined: Jul 2003

Posts: 7,067

Likes: 9

From: HOT'LANA, GAWJA

I would do all of the above and the rocker arms too...I replaced mine at 87K..

Feb 22, 2006 | 09:05 AM

orangeapeel

ЯєŧąяĐ Єl¡m¡иąŧøя ™

iTrader: (18)

Joined: Nov 2004

Posts: 16,083

Likes: 4

From: Justin, TX

Rockers are normally ok, but you could get a fresh rebuild on them from Nasty Performance for around $250 I think. Swell deal!

Feb 22, 2006 | 10:27 AM

slt200mph

TECH Senior Member

iTrader: (42)

Joined: Jul 2003

Posts: 7,067

Likes: 9

From: HOT'LANA, GAWJA

Quote:

Originally Posted by orangeapeel

Rockers are normally ok, but you could get a fresh rebuild on them from Nasty Performance for around $250 I think. Swell deal!

Not that swell of a deal..if you are going to spend $250 on a rebuild just spend a little more and get after market ones...the stock ones work very well...I bought a complete set from someone who replaced their stock ones with aftermarket for $50..they had 2000 miles on them..the ones they replaced had 87000 on them..

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last