Cam for TEA Stage 2
Cam for TEA Stage 2 Im getting some 5.3 stage 2 TEA heads milled .015 and im fixin to get a cam. I need to know what would be a good cam to run with these heads. Any advise will help. Thanks
First off with the heads milled that far the MS3 will never fit without flycuting the pistons.
The F13 is probally what I would suggest as long as it would clear. I have used a 228/232 cam a few times with nice results also.
The F13 is probally what I would suggest as long as it would clear. I have used a 228/232 cam a few times with nice results also.
Trending Topics
Give Tea a call and they will give you the info you need for those heads. I talked to Brent last year about specs on a cam to compliment my stage 1.5 heads and he recommended something around 230-234 intake duration and 236 to 240 exhaust duration. Cam selection is tough because there are so many variables besides just head type. Get on Comp Cams website and select the online cam request form and look at all the questions they ask. And for the most part, they are still guessing. 
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
