Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Thoughts on this H/C combo...

Thread Tools
 
Search this Thread
 
Old 03-05-2006, 07:52 AM
  #1  
Teching In
Thread Starter
iTrader: (1)
 
1 Clean WS6's Avatar
 
Join Date: Nov 2004
Location: Marietta GA
Posts: 33
Likes: 0
Received 0 Likes on 0 Posts
Default Thoughts on this H/C combo...

Hey guys!

Been thinking of going with this set-up...

Patriot LS6 style heads with 2.055/1.57's and a 59cc chamber

232/236 592/592 112 cam

My car has all the bolt on's with an LS6 intake and Dynatech longtubes with OR pipes.

Thanks for your input!

Mike
Old 03-05-2006, 08:39 AM
  #2  
LS1 Tech Administrator
iTrader: (14)
 
Patrick G's Avatar
 
Join Date: Nov 2001
Location: Victoria, TX
Posts: 8,244
Likes: 0
Received 31 Likes on 27 Posts

Default

That's a solid setup that should be good for 410-420 rwhp.
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
Old 03-05-2006, 08:58 AM
  #3  
TECH Resident
 
eamador11's Avatar
 
Join Date: Jul 2005
Location: NJ
Posts: 907
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Patrick G
That's a solid setup that should be good for 410-420 rwhp.
i agree but imo, youd be in the 440rwhp range.
Old 03-05-2006, 09:48 AM
  #4  
Teching In
 
MONG00SE's Avatar
 
Join Date: Aug 2005
Posts: 48
Likes: 0
Received 0 Likes on 0 Posts
Default

you may want check out cartek, they have proven packages that work....www.cartek.net
Old 03-05-2006, 03:02 PM
  #5  
LS1 Tech Administrator
iTrader: (14)
 
Patrick G's Avatar
 
Join Date: Nov 2001
Location: Victoria, TX
Posts: 8,244
Likes: 0
Received 31 Likes on 27 Posts

Default

Originally Posted by eamador11
i agree but imo, youd be in the 440rwhp range.
If he were talking about AFR 205s milled to 59cc, then yes, I'd agree with you, but he's talking about Patriot heads. The majority of those heads/cam setups have been falling in the 410-420 range. Watch the dyno section and you'll see some consistencies.




All times are GMT -5. The time now is 10:27 AM.