How would this setup do on say 150-200hp shot?
MS3,upgraded valvetrain,and Stage 2 LS6 Heads.
Also what stall/gear setup should i go with for this?
Currently running Vigilante 3000 and 4.10s on stock
long block with bolt ons and TNT 150hp shot.
Also plan on adding 4l80e and 9inch.
Anything else i should be worrying about?

 

Yes, based on my limited knowledge...traction.

 

bottom end

 

Well guys????

 

That Vig will probably flash around 3700-3800 on the hose. So I would think that you would be ok in that aspect. Get a steel driveshaft.

 

Only one way to find out how far it'll take me. When it breaks,Ill just build my stroker

 

Another MRS guy! I would say a multi stage or a progressive nitrous controller would help the bottom end last a little longer with a big shot. Those two things will also help with the traction as well. You're going to need a stout rear and DS, who knows how much the 4l60E is going to take.

 

I plan a 100hp shot then another 100hp shot. Launch on first stage then hit 2nd stage in 2nd. What do you guys think?