Time for Heads
Time for Heads Time for heads. Lets hear it guys. No budget limit. I need some opinions on heads. Feel free to give some good head and cam combos. I have a big cam in it right now, (can't find the specs for my current cam) but I’m most likely going to change the cam again. It's a 02 WS6, and it is not a daily driver. Give me full names I don't know some of these abbreviations.
AFR 205's with a 231/237 or maybe an MS3 if you are feeling saucy! Make sure you have some gears added into the equation too. I bet since you have a big cam you surely have some 3.73's atleast.
TECH Veteran
Joined: Dec 2001
Posts: 4,117
Likes: 0
From: Ft. Lauderdale, FL, USA
Originally Posted by Forza13
Time for heads. Lets hear it guys. No budget limit. I need some opinions on heads. Feel free to give some good head and cam combos. I have a big cam in it right now, (can't find the specs for my current cam) but I’m most likely going to change the cam again. It's a 02 WS6, and it is not a daily driver. Give me full names I don't know some of these abbreviations.
Heads? Intake? TB? Drag car? Street car?
I'm no expert but AFR 225's and ETP 265's are at completely different ends of the spectrum. One could be great for your engine and the other might be a complete waste of money for you.
Trending Topics
TECH Veteran
Joined: Dec 2001
Posts: 4,117
Likes: 0
From: Ft. Lauderdale, FL, USA
Originally Posted by JZ'sTA
AFR (air flow research) and ETP (ET Performance) are at the top of the LS1 head game. You will get awsome power out of either head.
330 and 390 cfm's are a huge difference. What I'm saying is: If he buys the ETP 265's and has an LS6 intake and a stock TB and a small cam, he will be wasting his cash. ON the other hand if he buys the AFR 225's and has all the other good stuff, the heads will be a joke for his engine and will choke the engine big time. Cubic inches matters too. So there's alot of other info needed to make an informed proper decision.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo
Like the others said, ETP and AFR are the tops out there if money is no object, although im also interested in the new patriot predator casting. Call teh sponsors and talk to them about your current and planned mods, as well as your goals, theyll set you straight.
TECH Enthusiast
Joined: Jul 2005
Posts: 732
Likes: 0
From: Herndon, VA
Yeah, the Predator heads look really interesting for the assembled price and small port volumes. I can't wait to see some results. Last word (a few days ago) they were still dialing in the CNC programs. The combustion chambers look familiar, huh? I wish the pictures available were bigger.
TECH Enthusiast
Joined: Jul 2005
Posts: 732
Likes: 0
From: Herndon, VA
Originally Posted by Quickin
WarHawk head is also coming out. People are talking over 400cfm.
TECH Veteran
Joined: Dec 2001
Posts: 4,117
Likes: 0
From: Ft. Lauderdale, FL, USA
Originally Posted by FUN LS1
I was checking out the Warhawk site today, and only saw the short block 427 listed. Anyone have a clue how close they are to selling the heads?
Originally Posted by Forza13
Time for heads. Lets hear it guys. No budget limit. I need some opinions on heads. Feel free to give some good head and cam combos. I have a big cam in it right now, (can't find the specs for my current cam) but I’m most likely going to change the cam again. It's a 02 WS6, and it is not a daily driver. Give me full names I don't know some of these abbreviations.
With so many possible bore/stroke, car/truck combinations now available, it would help to know what bore/stroke combination you want heads to fit. Also include some possible camshaft possibilities you're considering. It would also help to know your rpm operating range and intake setup.
Richard
I need to give you guys a lil more info. I'm building the car for street/strip. As of right now, the car has a large comp cam, (i mentioned i can't find the specs for my cam), SLP air lid, Dynatech LT headers (no cats) into 3" custom Y-pipe with Magnaflows, 3200 Yanko, trans has been rebuilt/reinforced, Moser 9" with truetrac and 4.11 motive (being installed as we speak), SLP- STB, SFC and DSL, BMR- TA and LCAs. After my rearend is done, i plan on doing several mods at once. Heads and most likely new cam, FAST LSX manifold, FAST 90mm TB, 85mm MAFS, plugs, wires and a few other odds and ends.
TECH Enthusiast
Joined: Jul 2005
Posts: 732
Likes: 0
From: Herndon, VA
Originally Posted by Forza13
I need to give you guys a lil more info. I'm building the car for street/strip. As of right now, the car has a large comp cam, (i mentioned i can't find the specs for my cam), SLP air lid, Dynatech LT headers (no cats) into 3" custom Y-pipe with Magnaflows, 3200 Yanko, trans has been rebuilt/reinforced, Moser 9" with truetrac and 4.11 motive (being installed as we speak), SLP- STB, SFC and DSL, BMR- TA and LCAs. After my rearend is done, i plan on doing several mods at once. Heads and most likely new cam, FAST LSX manifold, FAST 90mm TB, 85mm MAFS, plugs, wires and a few other odds and ends.
Originally Posted by FUN LS1
Yeah, the Predator heads look really interesting for the assembled price and small port volumes. I can't wait to see some results. Last word (a few days ago) they were still dialing in the CNC programs. The combustion chambers look familiar, huh? I wish the pictures available were bigger.
The question about these AFRs and ETPs is, are they worth the money. Don't get me wrong i have no problem paying more for a better product, but am i gona get as much out of them as i could with Patriot heads?
Give me some links and info for these AFRs, ETPs, and Patriots. Thanks
Give me some links and info for these AFRs, ETPs, and Patriots. Thanks
Last edited by Forza13; Mar 22, 2006 at 09:01 PM.
