Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

What to consider?

Thread Tools
 
Search this Thread
 
Old Apr 1, 2006 | 10:34 AM
  #1  
spankyls1's Avatar
Thread Starter
Teching In
 
Joined: Feb 2004
Posts: 5
Likes: 0
Default What to consider?

I putting together a list of parts that i need to upgrade or replace on my 98' t/a before a procharger install. The car has 101,000 miles on the clock and is a 150mi per week daily driver,with an a4 . I am curious where i should start on upgrading for the procharger. Mostly wondering if its recommended to rebuild the bottom end for 5-7 psi of boost. I am planning on stickin' with the stock cubic inch motor. Any suggestions are greatly appreciated.
Reply
Old Apr 1, 2006 | 11:03 AM
  #2  
TTU98SS's Avatar
TECH Apprentice
20 Year Member
iTrader: (5)
 
Joined: Jan 2005
Posts: 328
Likes: 0
From: Addison, TX
Default

is your car completely stock right now?
Reply
Old Apr 1, 2006 | 11:35 AM
  #3  
spankyls1's Avatar
Thread Starter
Teching In
 
Joined: Feb 2004
Posts: 5
Likes: 0
Default

Car is mostly stock except for a lid,ory,magnaflow catback, edlebrock t/a, and a few free mods.
Reply
Old Apr 1, 2006 | 12:33 PM
  #4  
TTU98SS's Avatar
TECH Apprentice
20 Year Member
iTrader: (5)
 
Joined: Jan 2005
Posts: 328
Likes: 0
From: Addison, TX
Default

I would call a sponsor in your area and talk to them about it. Or try posting this in the FI forum
Reply




All times are GMT -5. The time now is 08:24 PM.