Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Hesitation problem solved!! Thanks guys!!

Thread Tools
 
Search this Thread
 
Old 05-06-2006, 05:29 PM
  #1  
Teching In
Thread Starter
 
sipofa's Avatar
 
Join Date: Mar 2006
Posts: 15
Likes: 0
Received 0 Likes on 0 Posts
Default Hesitation problem solved!! Thanks guys!!

Hello guys, I had asked some info about my car hesitating, and that when I unplugged the MAF it was better, well I took the MAF off and to my surprise the bars and sensors in between the bars were black and so dirty!!!! I cleaned it completely and now the car goes good, no hesitation at any RPM.
Thanks again for the help.
Old 05-06-2006, 06:17 PM
  #2  
TECH Senior Member
iTrader: (23)
 
brad8266's Avatar
 
Join Date: Aug 2005
Location: Watertown, NY
Posts: 8,797
Likes: 0
Received 0 Likes on 0 Posts
Default

what kind of air filter do you have?? Those shitty KN type filters that you have to oil are what normally cause this.
Old 05-06-2006, 09:31 PM
  #3  
Doc
FormerVendor
iTrader: (9)
 
Doc's Avatar
 
Join Date: May 2003
Location: Jacksonville, Fl
Posts: 1,573
Likes: 0
Received 0 Likes on 0 Posts
Default

Filters don't over zelously oil themselves. I have been using one of "those filters" for 8 years-no problems.




All times are GMT -5. The time now is 08:32 AM.