Can I run this?

Reply Subscribe

Thread Tools

Search this Thread

May 13, 2006 | 01:22 PM

drkbluls1

Thread Starter

Staging Lane

iTrader: (1)

Joined: Nov 2005

Posts: 96

Likes: 0

From: Maricopa, Az

Can I run this?

I have a Comp Cams Custom ground cam I got off a friend. Specs are .622 lift int and exh 258 int and 270 exh dur @ .050. Wil this fit stock bottom end, have a feeling answer is no....

May 13, 2006 | 01:49 PM

ShevrolayZ28

TECH Addict

iTrader: (4)

Joined: May 2005

Posts: 2,318

Likes: 1

From: Massachusetts

Quote:

Originally Posted by drkbluls1

I have a Comp Cams Custom ground cam I got off a friend. Specs are .622 lift int and exh 258 int and 270 exh dur @ .050. Wil this fit stock bottom end, have a feeling answer is no....

That's a big one! I don't know but you might need to provide some info about your heads before any of the fart smellers around here can give you a decent answer. Valve size...rocker ratio...milled heads...etc

May 13, 2006 | 01:51 PM

s346k

TECH Junkie

iTrader: (4)

Joined: May 2005

Posts: 3,433

Likes: 1

From: johnson co.

258/270 @ .050 cam in a stock-head ls1?

no. unless your head gaskets raise the head up like an inch..

May 13, 2006 | 05:58 PM

hammertime

TECH Fanatic

iTrader: (1)

Joined: Apr 2006

Posts: 1,436

Likes: 2

From: Smithton, IL

If that duration at .050 is correct, that cam probably won't work with stock anything.

I wouldn't use any cam that didn't come with the cam card, as there is little way to be sure it is round and installed correctly.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last