Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Little Help?

Thread Tools
 
Search this Thread
 
Old May 14, 2006 | 07:34 PM
  #1  
Take 2's Avatar
Thread Starter
Launching!
iTrader: (9)
 
Joined: Apr 2006
Posts: 279
Likes: 0
From: Houston
Default Little Help?

I have 83k on my 99 ls1. I am really thinking of a cam, But some know it alls at work are telling me if I do I am going to F-up the bottom end??? and if not what cam should I go with? Its an A4, 3:73 so any idea on the size of cam and stall?? I drive it to work every now and then, But not everyday. Thanks for the help ahead of time.....
Reply
Old May 15, 2006 | 07:53 PM
  #2  
Take 2's Avatar
Thread Starter
Launching!
iTrader: (9)
 
Joined: Apr 2006
Posts: 279
Likes: 0
From: Houston
Default

Any one Please!!
Reply
Old May 15, 2006 | 08:02 PM
  #3  
94redz28's Avatar
11 Second Club
iTrader: (12)
 
Joined: Oct 2004
Posts: 224
Likes: 0
From: SW Missouri
Default

Tell the "know it alls" to stfu. A cam like a tr224 or tr228 would be a good cam for you and will not hurt your bottom end. I started modding my car when it had 92k miles on it Once you decide on a cam call fuddle and he will set you up with a great stall
Reply
Old May 15, 2006 | 08:08 PM
  #4  
Take 2's Avatar
Thread Starter
Launching!
iTrader: (9)
 
Joined: Apr 2006
Posts: 279
Likes: 0
From: Houston
Default

Thanks man I feel better knowing someone else has Modded a car that has some miles on it I am going to install the LTs this weekend, did you do yours? or have someone do it, If you did how hard is it. I mean I got SOME mech.skills I am just curious it I can do it in a day? Thanks
Reply
Old May 15, 2006 | 08:13 PM
  #5  
94redz28's Avatar
11 Second Club
iTrader: (12)
 
Joined: Oct 2004
Posts: 224
Likes: 0
From: SW Missouri
Default

My car was modded to the max and ran 11.63@124. I put pacesetter lt's on my car in one day, its not that bad if the bolts are not stripped or rusted on
Reply




All times are GMT -5. The time now is 12:38 AM.